Build a Better Fire, Faster
PyreLogs™ are laser-cut from steel for fast and simple assembly. Use these tips to build a better fire, faster.
Each PyreLog™ is assembled with 3 side shields and 2 end caps — no tools required:
1) Hold one side shield on its edge.
2) Slide an end cap onto one end of the shield, guiding the shield tabs into the end cap slots.
3) Slide one bridge pin into the hole in the side shield tab to lock in place.
4) Slide the two remaining side shields into the end cap slots to form a triangle.
5) Lock into place with one pin in each hole.
6) Repeat for the other end cap and all shields to assemble both PyreLogs™.
Build a Better Fire Lay:
1) Place 2 PyreLogs™ bases 10-12 inches apart inside your fire pit or ring.
2) Place tinder and starter logs between the PyreLogs™.
3) Lay the thickest firewood across the PyreLogs™ in a perpendicular pattern with a little space between each piece of wood (like setting up a game of Jenga®).
4) Build upwards, using the thickest logs on bottom and the thinnest firewood on top.
5) Light the tender and let PyreLogs™ fuel the burn.
Other Important Details:
- Do not place wood around PyreLogs -- This defeats their purpose.
- PyreLogs™ reusable campfire bases do not require any special cleaning. Just hose them off or use a soft bristle brush for stuck on debris.
- For backyard use, do not leave bases in your pit when not in use. We recommend storing cold bases under cover and out of bad weather.
- ♻ In the rare event that something catastrophic happens to your PyreLogs, PLEASE RECYCLE them.
A fire is your responsibility.
